Suche

provide a high value contribution. Pleating and frame bonding Jowatherm ® and Jowat-Highterm ® adhesives for pleating and frame assembly provide a high initial [...] impress through superior adhesion to different types of filter materials, like papers and non-wovens, and a high heat resistance which is necessary for downline [...] requirements with regard to air filtration in vehicles and buildings, as well as a wide range of filter materials and manufacturing methods. And the demands are

Bag sealing is a complex process with very short process cycles. Bagging is a mass process and the interplay between the individual system components and their [...] the adhesive has been applied. The product is characterised by a high hot tack (fast tack), a wide range of adhesion to many different materials, and good heat [...] of the packaging unit, and the point of sale or of use. For every bag type, there is a sealing system. Adhesives are applied by roller or by nozzle. The bonding

Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling and therefore play a major role in facilitating a safe workplace [...] adhesives. From polyester to polyamide and later polyolefin – a clear trend emerged towards a completely different adhesives technology in edgebanding applications: [...] were a real quantum leap forward. The chemical crosslinking inside the adhesive coupled with the chemical binding to the bonding partners facilitates a significantly

common type of adhesive used for bonding construction textiles is strong PO hot melts. While the adhesive is applied over a large area when using a laminate [...] formulation, this product can be used to achieve a smooth, continuous film of adhesive even with a low application amount—a characteristic that is of high value to [...] processes. Whether processors choose a PO or a PUR adhesive, Jowat supplies suitable and reliable bonding solutions that will put a safe roof over your head in both

developing a technology that will sustainably replace the previous process. In addition to a new type of plastic base beam, the focus here is on a new adhesive [...] usually carried out by bonding with a two-component epoxy resin adhesive applied by specially developed robots. From both a cost and manufacturing perspective [...] e, it would be advantageous at this point to rely on a technology that facilitates the joining of a workpiece and carrier without the use of expensive and

be divided into three general groups: primary microplastics type A, primary microplastics type B, and secondary microplastics (cf. figure 1). The latter is [...] Primary microplastics type B are formed during use (e.g. tire abrasion or fibres released during the washing of synthetic clothing). Type A microplastics are e [...] millimetres in length. The release of type A microplastics can be intended, deliberately produced, or caused by accident. A major focus of the EU’s plastics strategy

materials—in a percentage that still keeps on growing. The most important base materials for these products include substances such as crude tall oil, a by-product [...] competition with food manufacturers. Polylactide is a promising material that is already being used as a plastic. As the basis for an adhesive, however, it still [...] is already dedicating a lot of resources to researching formulations and modifications that could be used to optimize the properties of a polylactide adhesive

adhesive manufacturer, Jowat plays a key role in providing a successful solution for the highly demanding task of developing a powerful adhesive suitable for all [...] corresponding coating systems. A number of different measures have already been developed for folding boxes: from an inner foil, a dispersion or extrusion coating [...] has contributed significantly to a sustainable solution. Numerous tests were carried out on many different cardboard types from different manufacturers to develop

stics, a smooth wetting pattern and the minimal foaming of this 1-component dispersion facilitate a high optical quality of the laminated product. A high compound [...] film lamination, surfaces may be finished with a layer of UV varnish. The used adhesives and varnishes have a major impact on the quality of the finished packaging [...] printed sheets Print sheets are laminated with a film to preserve the highly finished aspect of the packaging for a longer time. The adhesive system for this a

and the more layers a mattress is composed of, the more challenging are the requirements for the adhesive used for bonding the foam. With a minimal application [...] in the lamination of flat and profiled foams is a soft bondline. Modern, powerful adhesives are therefore a prerequisite for modern mattresses with different [...] be eliminated. Inefficient dwell times become a thing of the past. The reactive hot melt adhesives provide a solution for shorter and less complex production