Suche

processes. For side edges and milled areas, the dispersion is applied twice. The first layer is applied to close the small pores and fibres on the cutting edge and [...] lamination guaranteed After a short drying time, a second layer of adhesive is applied before the foil is laminated. To ensure a uniform result, the application [...] to the series is the 1K PU dispersion Jowapur® 150.93. The adhesive can be applied by atomised spraying at low processing temperatures, making it a great choice

in the development of Jowacoll ® 114.60 was to ensure that the glue can be applied cleanly on fully automatic doweling machines with nozzle applicators.

are usually carried out by bonding with a two-component epoxy resin adhesive applied by specially developed robots. From both a cost and manufacturing perspective [...] additive developed by Fraunhofer IFAM to the adhesive which, when a DC voltage is applied, enables adhesive weakening and simplified dissolution of the bond. Since

strength, good creep resistance as well as low VOC and FOG values, and can be applied with the application technology established in the industry. Lamination of [...] adhesive also impresses with minimal stringing at low processing temperatures if applied by roller. Jowat has successfully developed alternative technologies for the

performance and process quality. Traditional hot melt adhesives are generally applied at temperatures of up to 180°C. Jowat-Toptherm ® 851.99 has been optimized [...] sustainable due to a DIN-verified biobased raw material content of 33% and can be applied in different packaging processes at reduced temperatures starting from 120°C

PUR HM in production. Just like dispersions, these reactive adhesives are applied with an automated roller coater on the full surface of the substrate and only [...] further benefits provided by the PUR hot melts. Usually, reactive hot melts are applied on one substrate only. In demanding applications with special mattress structures [...] instance high-stress bonding of difficult materials – the adhesive may be applied on both surfaces. The hot melt penetrates in both substrates, creates an anchor

temperatures of up to 180°C are often the rule when it comes to melting and applying conventional hot-melt adhesives, Jowat-Toptherm® 851.99, which has been optimized [...] work safety: The use of this adhesive reduces the risk of burning for those applying it. In addition to energy savings, anyone who pays attention to the use of

lamination process of the filter components with activated charcoal, even when applying less adhesive. Lower grammages allow for a maximum of free active charcoal

Different glues have different strengths. Dispersion glues for instance are easy to apply and excessive adhesive can be cleaned with water. Reactive PU glues provide

process, nozzles apply dots or beads of hot adhesive onto the surfaces to be bonded. This often has an undesired side effect, where the applied adhesive is pulling [...] difficult. It is therefore even more important to ensure that the adhesive is applied precisely only where it serves a purpose. In the worst case, it may otherwise [...] bonded flap is not as bad as one which is visible. Make sure the adhesive is applied in the correct location and at a sufficient distance from the edge of the