Suche

technology specialist explains. “If vehicles no longer need to be controlled manually, that means modules like the steering wheel and the gearstick can be done [...] a monomer-reduced—and therefore not subject to hazard labelling requirements—PUR hot melt for coating vehicle interior design. “This adhesive can be used in

sessions, we also have a solution for you: The switch to our label-free PUR hotmelt adhesives of the Jowatherm-Reaktant ® MR family. These adhesives improve

adhesives (short: PUR prepolymers) are high-performance adhesives characterised by a broad spectrum of adhesion and bonding properties. PUR prepolymers are [...] available as one-component or two-component products. Benefits of one-component (1C) PUR prepolymer adhesives - good penetration into the substrate - no mixing necessary

with very high requirements and elastic properties. The advantages compared to PUR adhesives are a wide field of applications and the formulation free of isocyanates [...] as well as for sealing. For instance as a reliable all-purpose product in manual and industrial assembly processes, e.g. bonding end trims or filling expansion [...] vehicles. Application Description MS polymer Jowat ® 695.15 can be applied manually from Standard 290 ml cartridges using a cartridge gun or from Hobbock (22

show for the windows industry: Jowatherm-Reaktant® MR 604.90 is the first PUR hotmelt adhesive with a reduced monomer content and thus hazard-free labelling certified

cleaners. Especially in closed application systems it should be ensured that PUR hot melt adhesives and the Jowat ® flushing agent are melted evenly, to prevent [...] prevent clogged hoses and nozzles due to an unwanted reaction. If a reactive PUR hot melt adhesive has been processed, the system should be cleaned before downtimes [...] Jowat ® flushing agents push out the adhesive and stop the chemical reaction of PUR hot melts. Cleaning with chemical cleaners is usually not necessary if only

agents purge the adhesive from the system and stop the chemical reaction of PUR hot melt adhesives. Before the cleaning of the application system is started [...] reaction, especially in closed application systems, it must be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly. Cartridge [...] agent. Turn off the unit and allow cooling. If the processed adhesive was a PUR hot melt, it is especially important that all adhesive remnants are purged from