Suche

manufacture small cleaning heroes. Whether scourers with a sponge and an abrasive layer consisting of a rough fleece which may contain an abrasive agent, or a layer [...] applied. The end product is exposed to high mechanical and, due to the cleaning agent, also to chemical stress. Bonding the separate layers with powerful PUR [...] compound strength of the textiles and excellent resistance against moisture and cleaning agents. After laminating, the textile compound is cut into small pieces and

adhesion, medium initial strength. Jowat ® 930.94 is a corresponding flushing agent. For flushing applicator systems, melt units and hoses for PUR hot melts after [...] prevent the chemical reaction. Jowat ® 930.22 is a corresponding cleaner. For cleaning roller applicator systems. Product Features ✓ No GHS labelling necessary*

metal contact. A non-stick coating will also facilitate a considerably easier cleaning. The melting and application units should be equipped with a precise temperature [...] flush out hot melt remnants from the melt and applicator units with flushing agent Jowat ® 930.94 (red). Crosslinked, solid material has to be dissolved with [...] of Edgebanders See our Jowat Manual with Tips and Video How To Guide for cleaning problems and helpful tips for adhesive changes more 下载 进一步申请 在该领域的进一步应用 &

PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly. The primary task of a flushing agent is to push out the adhesive from the hoses and [...] major importance for a smooth and reproducible adhesive application. The cleaning effort varies depending on the application system and unit, and depends largely [...] adhesive and stop the chemical reaction of PUR hot melt adhesives. Before the cleaning of the application system is started, it must be ensured that the Jowat ®

Tips for cleaning the gluing unit of an edgebander after using a reactive hot melt adhesive such as Jowatherm-Reaktant ® with Jowat ® flushing agent. Application [...] with the flushing agent Jowat ® 930.74/.94 until all PUR hot melt adhesive has been extruded from the system. Remnants of flushing agent should remain in all [...] adhesive-carrying machine parts. When the flushing agent cools, it will shrink, thus increasing the cleaning effect. Melting Tank (Glue Pot) 1. At processing

hot melt adhesives. Before the cleaning of the application system is started, it must be ensured that the Jowat ® flushing agent and the adhesive used are compatible [...] ® flushing agent are melted evenly. Cartridge Melter In case of longer downtimes, flush with one half cartridge or slug of Jowat ® flushing agent. Turn off the [...] container with flushing agent after heating, insert the adhesive, and make sure the adhesive extrudes all remnants of the flushing agent. Carry out the procedure

with the flushing agent Jowat ® 930.34/.74/.94 until all PUR hot melt adhesive has been removed from the system. A small amount of flushing agent should remain [...] blanketed with inert gas. When it cools, the flushing agent will shrink, therefore increasing the cleaning effect. Drum Melters Avoid any contamination during [...] mechanical cleaning is usually enough. If the adhesive processed is a PUR hot melt, the roller pan should be emptied, flushed with the flushing agent Jowat ® Jowat