Suche

of the following glues: Jowacoll ® 103.30 (D3 glue for superior requirements), Jowacoll ® 103.70 (pH-neutral D3 glue), Jowacoll ® 104.20 (general-purpose glue [...] adhesives supplied by Jowat now also provides professional solutions for manual adhesive applications. The comprehensive package of four Jowacoll ® dispersion adhesives

the use and requirements for the floor, the portfolio provides adhesives from D3 dispersions according to EN 204/205 for interior applications with short-term [...] as thermoplastic foils and which meet the requirements for durability class D3. Two-component EPI (emulsion polymer isocyanate) adhesives have been tried and [...] series meet the entire range of requirements for lacquer glues. This makes adhesive handling significantly more convenient, especially for smaller woodworking

the liquid adhesive and emissions from the set adhesive film. On the one hand, there is the potential stress for the processor of the liquid adhesive and, on the [...] two types of emissions: from the liquid adhesive and from the cured adhesive film. Processors of the liquid adhesive are exposed to the former, and users of [...] ingredients can leave behind are well known – accordingly, choosing the right adhesive makes a major contribution to the safety of users and end users. Pollutant-reduced

are used in the formulation of the adhesive? What impact does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding [...] the existing building stock for the future within the set time frame.” The adhesive manufacturer Jowat draws on extensive expertise in the manufacture of building [...] adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer pursues a holistic approach with its Green Adhesives , aimed

cost-effectiveness as a conventional fossil-based adhesive. The success of a sustainable and thus future-proof adhesive can be evaluated from various points of view [...] basis for an environmentally friendly adhesive formulation. The aim is to replace as many components of the adhesive formulation as possible – for example, [...] Increasing sustainability in adhesive bonding can only succeed by looking at different dimensions. The optimization of the adhesives themselves is particularly

laminating of wood-based materials. The PVAc dispersion meets durability class D3 in accordance with EN 204/205. This means that Jowacoll ® 103.10 can be used [...] Jowat ® 195.40 , this will further increase the water resistance and the adhesive will meet durability class D4. This PVAc dispersion has been met with very [...] instance in the manufacturing of door leaves. Product Features Jowacoll ® 103.10 D3 dispersion with high water resistance. Multi-purpose glue for bonding hard- and

application amount does not exceed 150 g/m². The dispersion is classified a D3 adhesive in accordance with EN 204/205 and meets a tensile strength > 7.0 N/mm² according [...] on to environmental and customer protection. Jowacoll ® 103.30 is a PVAc adhesive for bonding hard 3and soft wood species as well as for the flat laminating [...] mixing the glue with crosslinking agent Jowat ® 195.40 , in which case the adhesive will meet durability class D4. Jowacoll ® 103.30 can be applied manually as

provide visitors with specific, specialised information on the different adhesive applications. The conclusion has been extremely positive. Visitors were very [...] product series presented by Jowat at the trade fair was an unfilled edgebanding adhesive for superior applications, which facilitates colourless and virtually invisible [...] focus on the significant process and efficiency benefits compared to liquid adhesive systems in the manufacture of mattresses and upholstered furniture. The new

it uses every day in its production process. The dispersion adhesive corresponds to stress group D3, meaning it makes the elements more resistant to short-term [...] a frame of solid wood slats. VOMO & Jowat: a strong team Having the right adhesive is indispensable for this type of production, and VOMO has always relied on [...] elements account for the largest share of the adhesives used. A dispersion adhesive is required for this area, which has the longest possible open time during

chain and how they may affect the adhesive and the bonding result is of utmost importance during the selection of the adhesive to provide tailored solutions for [...] requirements for the bonding of the solid wood layers with the top layer. Which adhesive will provide the best results depends on several factors, such as the wood [...] discolour when bonded with acidic adhesives. This is prevented with special D3 dispersions from Jowat with a neutral pH value. An additional benefit from these