Suche

ABS and PP edgebands. Application by gravure or smooth roller. Product Features ✓ Advantages Primer Jowat ® 408.48 provides special benefits for ABS and PP edgebands: [...] (THF) and N-Ethylpyrrolidone (NEP), and has been developed particularly for PP and ABS edgebands. Following many decades of experience with edgeband primers [...] processed properly, bites the ABS but does not dissolve. Very good adhesion on PP with Corona pretreatment and 3 % Jowat Crosslinker 498.00. Chlorine-free – therefore

open time, high initial strength and good adhesion to materials based on PP (e.g. NF-PP). The product is block-free and is used for precoating decors as reel material [...] The continuously growing diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension

Jowat ® 408.48 PU 53,5 ± 2,5 / 20 13 ± 1,5 / 90 PP, PET, ABS de en Jowat ® 408.40 PU 35 ± 5 / 20 15 ± 2 / 90 ABS, PP de en water based primer Base Viscosity [mPas] [...] 409.12 PU 650 / 20 33.5 PVC, ABS, PP, PMMA, PET, Alu / Stainless steel de en fr Jowat ® 409.45 PU 200 / 20 28 PVC, ABS, PP, PMMA, PET de en The products listed [...] information concerning the large variety of materials processed (like PVC, ABS, PP, PET, PMMA, aluminium, stainless steel), the application technology in use is

The continuously growing diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension [...] extremely high heat resistance and a very wide range of adhesion to materials like PP and NFPP. In a comparison test, Jowat-Toptherm ® 238.80 reached heat resistance

/ 200 180 - 200 For flat lamination, for instance of substrates based on PP (NF-PP) in the automotive industry, also edgefolding operations. Also for precoating [...] melt adhesives: Good adhesion to nonpolar substrates, e.g. polypropylene, NF-PP External precoating possible Easy and user-friendly processing Good adhesion [...] fogging values 1 Upper Door Trims Materials (examples): Carrier substrate: ABS, PP, PC/ABS Decor material: genuine leather, PVC foil, TPO foam foils Adhesive systems

bonded – from ABS and ABS blends to PP-based parts, with or without natural fibre content. Pretreatment is only necessary for PP-based parts. Jowatherm-Reaktant

this series. The PUR hot melt is suitable for bonding standard edgebands (ABS, PP, PVC, veneer, resinated paper) on throughfeed lines. Application Description [...] Wide field of application, e.g. edges made of HPL/CPL, polyester, PVC, ABS, PP, resinated paper, solid wood or veneer. Jowat ® 930.94 is a corresponding flushing

product group. These adhesives ensure a strong bond on all standard plastics (PET, PP and PVC). In addition, the PUR hot melts are transparent, provide an optimum

from Jowat are based on the same chemical basis as the PE bottom layer and the PP filaments, and therefore play a major role in the recyclability of the product

® 745.60 also impresses with a good adhesion to acetate films and pretreated PP films. Jowacoll ® 745.60 can be processed with all established application systems