Suche

vårt sökande efter "pvac dispersion d3" gav 7 resultat.

  1. Bridge the Gap - Jowacoll® 114.60 | A Good Choice Since 1997

    The doweling glue Jowacoll ® 114.60 has been tried and trusted by processors all over the world for over two decades already. Today, it continues to impress due to high bonding strength and efficient
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/bridge-the-gap-jowacollr-11460-a-good-choice-since-1997/

  2. Jack of All Trades - Jowacoll® 705.11 | A Good Choice Since 2004

    Jowacoll ® 705.11 can be considered the Swiss army knife among dispersions. Barely any other dispersion can be used in such a wide range of applications. Since the
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jack-of-all-trades-jowacollr-70511-a-good-choice-since-2004/

  3. Keep Your Head Above Water - Jowacoll® 102.26 | A Good Choice Since 2000

    frame scantlings. The dispersion must be mixed with 5 wt% of the hardener Jowat ® 195.35 before processing to meet durability class D4 according to EN 204/205 [...] and broad range of application are widely appreciated benefits of this PVAc dispersion.
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/keep-your-head-above-water-jowacollr-10226-a-good-choice-since-2000/

  4. Keep a Firm Grip - Jowacoll® 119.60 | A Good Choice Since 2002

    The PVAc-based adhesive Jowacoll ® 119.60 has been established in the market for almost two decades and has maintained its value for trade and industry alike
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/keep-a-firm-grip-jowacollr-11960-a-good-choice-since-2002/

  5. Make a Clear Cut - Jowat® 900.00 | A Good Choice Since 1994

    Jowat ® 900.00 is used primarily as a release agent for adhesives based on PVAc dispersion, UF, MUF and PRF.
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/make-a-clear-cut-jowatr-90000-a-good-choice-since-1994/

  6. Turn on the Heat - Jowapur® 150.50 | A Good Choice Since 2002

    bonding of the changing materials. PU dispersions have become established as reliable adhesives for the lamination of 3D furniture fronts and facilitate end products [...] industry dictate the design of furniture fronts and determine the requirements for 3D lamination. On one day, flat fronts mainly laminated with high-gloss PVC foils
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/turn-on-the-heat-jowapurr-15050-a-good-choice-since-2002/

  7. You Can Bank on It - Jowacoll® 103.10 | A Good Choice Since 1997

    well as for the flat laminating of wood-based materials. The PVAc dispersion meets durability class D3 in accordance with EN 204/205. This means that Jowacoll ®
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/you-can-bank-on-it-jowacollr-10310-a-good-choice-since-1997/

Sortera efter

Ta bort alla filter