Applikation Beskrivning

Lim för fönsterprofiler

I dagens läge väntar vi oss att moderna fönster eller ytterdörrar ska hålla kring 25 till 40 år. Under denna tid ska fönster och dörrar fungera utan problem och se bra ut, vilket betyder att folielaminat och limsystemet inte ska separera från PVC- eller aluminiumprofilen även om påfrestningarna på grund av väderförhållanden är extrema.

PUR-smältlim har redan i decennier visat sig vara mycket lämpade för laminering av fönsterprofiler. Kontinuerlig vidareutveckling av folier som används, ständigt ökande utbud av material och dekor samt minskad lagringstid för profilerna efter laminering – alla dessa faktorer medför större utmaningar för limmet. Därför behöver vi i dagens läge lim som fäster vid många olika material med snabb härdning, vilket möjliggör omedelbar efterbehandling av laminerade profiler.

Primer

En primer har två huvudsyften:

1. Rengöra profilytan genom att lösa upp vanligen opolära främmande material på ytan från PVC-sammansättningen eller som utvecklats under extrudering.

2. Förbättra profilytans fysiska vidhäftningsförmåga genom svällning/lätt upplösning och/eller genom att ändra ytpolariteten för att förbättra vidhäftningsförmågan.

Produktinformation

Choose a product group
  • PUR hot melt adhesive
  • PUR hot melt adhesive (non-hazardous)
  • cleaner and primer

PUR hot melt adhesive

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Open Time [s] /
Temperature [°C] /
µm Film
Density [g/cm³] /
Temperature [°C]
Certificate Download
technical
data sheet (PDF)
Jowatherm-Reaktant® 604.15 PUR Hot Melt Adhesive 35000 ± 5000 / 140 140 30 / 140 1,1 ± 0,1 / 23 de en fr
Jowatherm-Reaktant® 604.17 PUR Hot Melt Adhesive 47000 ± 8000 / 140 135 25 / 135 1,1 ± 0,1 / 23 de en fr
Jowatherm-Reaktant® 604.20 PUR Hot Melt Adhesive 43500 ± 6500 / 140 120 - 140 30 ± 10 / 140 1,1 ± 0,1 / 23 RAL-GZ 716 de en fr
Jowatherm-Reaktant® 604.25 PUR Hot Melt Adhesive 25000 ± 7000 / 140 120 - 140 9 ± 3 / 140 1,1 ± 0,1 / 23 RAL-GZ 716 de en fr
Jowatherm-Reaktant® 604.35 PUR Hot Melt Adhesive 25.000 ± 10.000 / 140 120 - 140 90 ± 30 / 140 1,1 ± 0,1 / 20 RAL-GZ 716 de en fr

PUR hot melt adhesive (non-hazardous)

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Open Time [s] /
Temperature [°C] /
µm Film
Density [g/cm³] /
Temperature [°C]
Certificate Download
technical
data sheet (PDF)
Jowatherm-Reaktant® MR 604.90 Monomer-Reduced PUR Hot Melt Adhesive 37500 ± 7500 / 140 120 - 140 30 ± 10 / 140 1,1 ± 0,1 / 20 RAL-GZ 716 de en fr

cleaner and primer

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Open Time [s] /
Temperature [°C] /
µm Film
Density [g/cm³] /
Temperature [°C]
Certificate Download
technical
data sheet (PDF)
Jowat® 406.78 Primer 10 ± 1 / 20 15 -25 0,8 ± 0,02 / 20 RAL-GZ 716 de en fr
Jowat® 406.84 Primer 14 ± 2 / 20 15-25 1,03 ± 0,03 / 20 RAL-GZ 716 de en fr
Jowat® 406.89 Primer 12 ± 5 / 20 15-25 1,3 ± 0,02 / 20 RAL-GZ 716 de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.

Nyheter och artiklar

Topnews
Byggnadselement
Professionella artiklar

Over the past years, one-component, moisture-curing PUR hot melt adhesives have become widely established in profile wrapping. Now, the first…

Topnews
Trä
Byggnadselement
Pressmeddelande

Jowat SE’s first non-hazardous and certified PUR adhesive for window profile wrapping to demonstrate once more the enterprise’s innovative strength in…

Topnews
Byggnadselement
Professionella artiklar

Specialised high-performance adhesives are essential to realising a wide design variety and superior functional characteristics in efficient…

Topnews
3D Fronten Hochglanz
Möbler
Professionella artiklar

A defining characteristic of the country house style was the three-dimensional geometry of furniture fronts. Today, variations of that design feature…

Topnews
Möbler
News

Jowat Manual with Tips and How To Guide for cleaning problems and helpful tips for adhesive changes

Nedladdningar

Windows and doors.PDFAdhesive Portfolio for Building Elements.PDF

Ytterligare tillämpningar