Suche

the substrates, the correct use of all production factors like adhesive application amount, sufficient drying, optimum pressing, and last but not least, a quality [...] is applied before the foil is laminated. To ensure a uniform result, the application amount is increased in gaps and areas with three-dimensional embellishments

melts that have been used successfully in many different industries and applications for decades contain monomeric diisocyanate, which is necessary for the chemical [...] Jowatherm-Reaktant ® MR product line are already established in a wide range of applications, for instance in the furniture, automotive and textile industries as well

by slot nozzles or by so-called curtain coating methods with the lowest application amount possible to ensure that the bonded substrates remain as open as possible [...] and escape. Another laminating method which is increasingly used, is the application of PUR hot melts with roller applicator systems. When used as a single unit [...] and permanent adhesive durability on all standard materials – also at low application amounts and high line speeds. Today, roofing liners are exposed to increasing

parameters are specifically tailored to the requirements of load-bearing glulam applications. They can be used for fingerjointing as well as for laminating, offer the [...] They are completely free of formaldehyde and require significantly lower application amounts due to a solids content of 100 %. Depending on the formulation, [...] to optimised flow properties, these adhesives are ideal for contactless application systems in fingerjointing units. Impressive constructions From Jowat’s point

regarding flame spread resistance and have wheel mark certification for applications in shipbuilding interiors. Therefore, they are ideally suitable for the [...] manufacturing process Excursus 3: Laminating with high-gloss materials Another application with high tensions is the lamination of high-gloss films and other materials [...] materials with PUR hot melts. Whether by roller or by nozzle, for this special application it is essential that the adhesive be applied at the lowest possible temperature

manufacturing reactive hot melt adhesives for the most different fields of application. Reactive hot melt adhesives from the Jowatherm-Reaktant® product group

The professional article is published the 8/2015 in the journal 'Furniture manufacturing panels & furniture Mena'. You can download the article down below .

formulations. Herrljunga Träindustri worked closely together with the technical applications service of Jowat to choose the most suitable hot melt for their specific [...] Advisory and professional competence In close cooperation with the technical application service from Jowat, Herrljunga Träindustri decided on a thermoplastic adhesive [...] requirements of companies like Herrljunga Träindustri. The right product for any application from profile wrapping to flat lamination. Engineering technology Herrljunga

experience. Jowat bonding technologies are used for almost all building applications, such as the insulation of roofs and walls, the production of window or [...] methods. Modern adhesives are an established bonding technology for those applications or can open doors for the realization of innovative and often complex composite [...] consumer? What impact does the adhesive have on processors during the bonding application? And how does the adhesive influence the actual bonding process? Green Adhesives

Conventional hot melt adhesives, depending on their composition and the area of application intended for them, are usually melted and applied at high temperatures. [...] bonding strengths with reduced material consumption. In addition, their clean application can simultaneously reduce contamination of machine parts and products.