Suche

vårt sökande efter "distributeur+on+jowat+adhesives" gav 291 resultat.

  1. Sustainability

    certificate here: Jowat SE Jowat Klebstoffe GmbH Codes of Conduct Along the Supply Chain Code of conduct for suppliers and service providers to the Jowat group: Code [...] International Sustainability & Carbon Certification (ISCC) Jowat receives ISCC PLUS certification Jowat SE has now been accredited with an ISCC PLUS (International [...] vocabulary all of its own, but the terms are far from synonymous. Here, Jowat sheds some light on the world of green language. 1 Bioplastics Another term for bio-based
    /sv-SE/profile/environmental-protection/

  2. Jowat AG at the Hannover Messe 2014. - Practical Demonstration: Jowat casting compound in low-pressure injection moulding

    well as moulding properties. On a low-pressure injection moulding line by TuTes GmbH Hotmelt- und Expansionstechnologie, Jowat AG gives a live demonstration [...] visitors may take home. Apart from the casting compounds, Jowat supplies a wide range of industrial adhesives. A special polyolefin-based assembly hot melt for cores [...] roboterized manufacture of cast engine components. The Adhesives Technology theme park is located in hall 6, Jowat AG has the booth No. B 45/1 at the joint exhibition
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-ag-at-the-hannover-messe-2014-practical-demonstration-jowat-casting-compound-in-low-pressu/

  3. Laminated timber assembly: The winner in open and pressing time – now it stands at about 1:1

    pressing time was around 1:3 to 1:4. As a result, the time remaining for adhesive application on large-surface laminated timber, which is the process step crucial [...] new Jowapur® 686.70 is very different and introduces a new generation of adhesives that combine a high quality of the end product with substantially increased
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/laminated-timber-assembly-the-winner-in-open-and-pressing-time-now-it-stands-at-about-11/

  4. Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

    of VOC emissions is possible with modern PO adhesives like Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin [...] impact resistance (Shore hardness) of Jowat-Toptherm® 236.30 reduces pattern transfer on the surface which might occur on laminated components when stacked. This [...] PO hot melts are used, for instance the new Jowat-Toptherm® 236.30. The performance spectrum of this adhesive covers for example highest surface quality and
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

  5. Jowat bonds foam for sweet dreams: New Jowat adhesive for mattress manufacture

    New: Jowat-Toptherm® for mattress manufacture This newcomer to the product group of Jowat-Toptherm® adhesives was developed specifically for industrial mattress [...] manufacture. It exhibits a low processing viscosity, which allows excellent wetting on flexible foam elements, wood-based substrates, cover materials, innerspring cores [...] to the normal and expected behaviour of thermoplastic hot melts, the new adhesive provides at the same time excellent wetting properties due to the low processing
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-bonds-foam-for-sweet-dreams-new-jowat-adhesive-for-mattress-manufacture/

  6. New formula: Thermoplastic adhesives for high-quality lamination of wood-based substrates – for general use with all common laminating machines using in- or offline application.

    from the product family of Jowat-Toptherm® permit a homogenous adhesive application without any striping effect. Depending on the quality of the surface of [...] l thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive bondlines with a degree of hardness tailored for specific [...] stress is exerted on the freshly laminated parts – e.g. stack pressure directly after manufacture. These new members of the product family of Jowat-Toptherm® are
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/new-formula-thermoplastic-adhesives-for-high-quality-lamination-of-wood-based-substrates-for-gene/

  7. Jowat AG – ZOW 2013: Intelligent bonding systems 3.0 Industrial adhesives with functional added values

    properties are required – on water and on land – Jowat adhesives are used. Customers not only benefit from the product performance but also rely on a competent advisory [...] the performance of a hot melt adhesive. One of the marks of quality is the surface hardness of a coating. Adhesives of the Jowat-Toptherm® product range have [...] perfor-mances of the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product values like reduced
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-ag-zow-2013-intelligent-bonding-systems-30-industrial-adhesives-with-functional-added-valu/

  8. Clean air in the passenger compartment: Jowat adhesives for the manufacture of filter media

    a filter is depends largely on the absorption capacity of its filtering medium: The innovative laminating adhesives from Jowat AG ensure optimum filtering [...] substrates: This prevents any negative impact on the filtering capacity of the medium itself. The adhesives developed by Jowat for attaching the activated charcoal are [...] Exactly this formula was adopted when developing the new Jowat-Toptherm® and Jowatherm-Reaktant® adhesives. With these products, very good results are achieved
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/clean-air-in-the-passenger-compartment-jowat-adhesives-for-the-manufacture-of-filter-media/

  9. Filters in top shape: Jowatherm® and Jowat-Hightherm® for pleating and frame bonding

    mechanical and thermal stresses. Pleating: The new Jowatherm® and Jowat-Hightherm® adhesives support the high-speed manufacturing processes of pleating by their [...] media without intermediate storage. In addition, both Jowatherm® and Jowat-Hightherm® adhesives have a wide spectrum of adhesion and allow secure bonding of substrates [...] of applications reduces setup times in production. Jowatherm® and Jowat-Hightherm® adhesives keep the filter media in shape and are responsible to a large extent
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/filters-in-top-shape-jowathermr-and-jowat-highthermr-for-pleating-and-frame-bonding/

  10. Jowat AG at the Filtech Strong performance record: New adhesives for the filter manufacture

    activated charcoal, the new Jowat-Toptherm® and Jowatherm Reaktant® adhesives guarantee highest performance with the lowest adhesive grammages. This ensures that [...] frame bonding The adhesives from the group of Jowat-Hightherm® are especially used for pleating due to their excellent adhesion properties on paper and fleece; [...] The efficient manufacture of filter systems requires modern adhesives that are tailored to fit the diverse manufacturing steps of lamination, pleating and frame
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-ag-at-the-filtech-strong-performance-record-new-adhesives-for-the-filter-manufacture/

Sortera efter