Suche

powerful Jowacoll® adhesive is an all rounder in this sector and does not require the addition of a crosslinker. This property along with the broad range of [...] lamination Foil lamination of cut-out windows is another application that requires specific adhesives. The current products of the group of Jowacoll® dispersions [...] display and removal openings – Shelf-ready packaging with 180 ° flap bonding requires high tack. The new shelf-ready packaging for various end products, especially

highest quality level in edgebanding. These moisture-curing hot melt adhesives require more caution during processing. They are supplied in moisture-proof packaging [...] technology, but above all also for small industrial companies that absolutely require PUR edgebanding for specific objects. Jowat SE has developed a patented m

110 - 130 240 / 120 For assembly bonding in the automotive industry that requires a long open time, good resistance to hydrolysis, and good heat resistance [...] 110 - 130 240 / 120 For assembly bonding in the automotive industry that requires a long open time, good resistance to hydrolysis, and good heat resistance [...] 110 - 130 240 / 120 For assembly bonding in the automotive industry that requires a long open time, good resistance to hydrolysis, and good heat resistance

eaktant® series. Convincing Benefits Standard use of aqueous dispersions requires a time-consuming interim storage period of up to 24 hours during the mattress [...] minimises storage periods and thereby increases cycle rates, it also only requires a significantly lower amount to achieve exceptional adhesive results in comparison [...] facilitate faster processes, however, they have to be dried out in a phase that requires a great deal of energy. This is where the reactive PUR hot melts are clearly

not expose the substrate to high heat. In addition, the adhesive does not require high temperatures for melting and application and thereby saves energy in [...] adhesion to a broad spectrum of membranes as well as to different textiles (this requires prior verification by testing). A soft textile feel is one of the main factors

Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin quantities for achieving the required tack. These adhesive formulations [...] this sector. In combination with the new Primer Jowat® 406.82 that does not require hazard labelling, it permits not only a shorter time for the profiles in storage

1995-1-1/NA for Switzerland. Approvals and certifications for other countries require separate testing. Suited for interior as well as exterior applications. The

Application Description The manufacture of clear folding boxes requires special adhesives. Clear folding boxes can be manufactured from a variety of plastics

steps, the adhesive has to master further challenges: short process times require a very fast build-up of a very high initial strength. Downloads Further A

the implementation of a more sustainable and resource-friendly production requires innovative textile materials which in the best case are also biodegradable