Suche

vårt sökande efter "require" gav 11 resultat.

  1. FachPack 2015: Industrial adhesives – Processing materials with many benefits

    powerful Jowacoll® adhesive is an all rounder in this sector and does not require the addition of a crosslinker. This property along with the broad range of [...] lamination Foil lamination of cut-out windows is another application that requires specific adhesives. The current products of the group of Jowacoll® dispersions [...] display and removal openings – Shelf-ready packaging with 180 ° flap bonding requires high tack. The new shelf-ready packaging for various end products, especially
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/fachpack-2015-industrial-adhesives-processing-materials-with-many-benefits/

  2. Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

    Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin quantities for achieving the required tack. These adhesive formulations [...] this sector. In combination with the new Primer Jowat® 406.82 that does not require hazard labelling, it permits not only a shorter time for the profiles in storage
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

  3. Jowat AG at the Filtech Strong performance record: New adhesives for the filter manufacture

    The efficient manufacture of filter systems requires modern adhesives that are tailored to fit the diverse manufacturing steps of lamination, pleating and frame
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-ag-at-the-filtech-strong-performance-record-new-adhesives-for-the-filter-manufacture/

  4. Jowat Green Adhesives for Sustainable Textile Lamination

    hot melt adhesive is not subject to hazard labeling and does therefore not require compulsory training starting from 2023. On the performance side, the adhesive
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-green-adhesives-for-sustainable-textile-lamination/

  5. “Service unites” – Jowat is presenting innovative adhesive technologies at interzum 2017

    optimum adhesion of adhesives on materials which are difficult to bond and require a surface treatment. These adhesion promoters are crucial for high bonding
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/service-unites-jowat-is-presenting-innovative-adhesive-technologies-at-interzum-2017/

  6. Drinktec 2013: Labelling and carton bonding are in focus of Jowat AG at the trade show - Polyolefin-based adhesive formulations for more efficiency in the manufacturing process

    when beverage cartons are closed in the section around the bottlenecks. This requires adhesives where the open time can be easily adjusted by variable temperature
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/drinktec-2013-labelling-and-carton-bonding-are-in-focus-of-jowat-ag-at-the-trade-show-polyolefin/

  7. Jowat Packaging Adhesives at FRUIT LOGISTICA

    cold. For years, the adhesive has therefore been used also for products that require a cooled supply chain to remain fresh until they reach their destination More
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-packaging-adhesives-at-fruit-logistica/

  8. Jowat SE at drupa 2016: „Tuning for Print Products“ – Adhesive solutions for special requirements in the printing industry.

    Braille application. Highly demanding applications in the printing industry require innovative adhesive solutions. Jowat adhesives and varnishes are tailored
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-se-at-drupa-2016-tuning-for-print-products-adhesive-solutions-for-special-requirements-in/

  9. Techtextil 2015 – Innovative adhesives from Jowat increase functionality of textiles and laminated automotive interiors

    fluorocarbons for improved water repellence. These difficult to bond surfaces require powerful products with excellent adhesion properties. Utilising the new,
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/techtextil-2015-innovative-adhesives-from-jowat-increase-functionality-of-textiles-and-laminated-a/

  10. Techtextil 2013: Strong adhesives for lamination of NFPP and PP in car interiors - Reliable bonding for highly difficult surfaces by using reactive hot melt adhesives

    tension and so far represented a real challenge for laminating procedures which require full surface wetting with adhesive. In most cases a surface pretreatment used
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/techtextil-2013-strong-adhesives-for-lamination-of-nfpp-and-pp-in-car-interiors-reliable-bonding/

Sortera efter

Ta bort alla filter