Suche

simplifying the lamination process for 3D surfaces. Several years ago, the enterprise revolutionised the laminating process for 3D furniture by developing one-component [...] German Adhesives Association (Industrieverband Klebstoffe e. V.) together with manufacturers like Jowat and Wemhöner have therefore published the “3D Furniture [...] While country style furniture may have become something of a rarity, 3D fronts continue to fascinate – they just follow new trends. Most furniture is based

Green Adhesives Jowat supplies a comprehensive portfolio of green adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer [...] are used in the formulation of the adhesive? What impact does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding [...] health concern. For example, Jowat has successfully developed D3 and D4 dispersion adhesives with significantly reduced formaldehyde emissions compared to their

nce D3 and D4 dispersion adhesives whose formaldehyde emissions are 80 % lower than those of their predecessors. In the automotive industry, adhesives with [...] employees. By changing the adhesive they use, for example by switching to monomer-reduced PUR hot melt adhesives or to solvent-based adhesives with a high solids content [...] Increasing sustainability in adhesive bonding can only succeed by looking at different dimensions. The optimization of the adhesives themselves is particularly

Der Fachartiktel ist am 01.09.2014 in der Fachzeitschrift Furniture Journal Ausgabe 9|2014 erschienen. Den gesamten Artikel können Sie unten als PDF herunterladen.

by In-Mould-Graining (IMG). The comprehensive range of adhesive systems supplied by Jowat, the adhesives specialist from Detmold, provides the perfect solution [...] water-borne adhesives based on polyurethane are used to precoat the substrates and are reactivated by heat after they have dried. These adhesives are characterised [...] this process and requires laminating adhesives with high initial strengths. PU dispersions and PUR hot melt adhesives from Jowat meet those requirements and

durability class D3. Two-component EPI (emulsion polymer isocyanate) adhesives have been tried and tested in applications that require durability class D4, in particular [...] portfolio provides adhesives from D3 dispersions according to EN 204/205 for interior applications with short-term water exposure or high humidity to D4 dispersions [...] durability is a key requirement for the adhesives used in the manufacture of flooring materials. Modern reactive dispersion adhesives are particularly suited for the