Suche

fleece. The filter manufacturing process is delicate and, in addition to bonding, the adhesive used has to fulfill a wide range of functions. Building filters for [...] manufacturers pleat the filter media and stabilize it using a hot melt adhesive.” Adhesives like Jowatherm 262.25 based on ethylene-vinyl acetate (EVA) are optimally [...] filters is due to the adhesive used in the manufacturing process of HEPA filters. “Big filter elements contain up to six kilograms of adhesive,” says Dressler. It

crosslinking reaction and largely influences the excellent bonding characteristics of those adhesives. However, the diisocyanates can lead to the formation of [...] portfolio of monomer-reduced PUR hot melt adhesives not subject to hazard labelling for many years already. Adhesives from the Jowatherm-Reaktant ® MR product [...] reason to change to modern adhesives of course also lies in the protection of employees. In addition, the modern PUR MR hot melt adhesives from Jowat often also

service, and with a brand new, fully certified set of adhesives. The right answer for every need The new adhesives are certified according to EN 15425:2017 and their [...] benefits: PUR Compared with other adhesive systems for the manufacture of load-bearing timber components, polyurethane adhesives provide several advantages in the [...] discernible glue line. The adhesives from the Jowapur® series are processed as a one-component system, making mixing, pot life, and adhesive remnants from production

hot melt adhesives are able to compensate for the forces acting on the bondline and are ideally suited for high-tension bonding. After complete adhesive crosslinking [...] the adhesive must be applied homogeneously to the bonding partner and irregularities in the substrate surface have to be evened out with the adhesive to create [...] Like any other bonding, high-tension bonding is basically a multi layer compound of at least two substrates. Tensions occur only when the bondline is exposed

How PUR hot melt adhesives can be used in future For many years, Jowat has been developing and manufacturing reactive hot melt adhesives for the most different [...] Reactive hot melt adhesives from the Jowatherm-Reaktant® product group have been at the cutting edge of permanent and superior bonding. An important building [...] building block of those reactive hot melt adhesives is monomeric diisocyanate. The processing of adhesives containing isocyanate has always been coupled with pr

thermoplastic adhesives and moisture-curing adhesives. These two systems are differentiated in regard to their setting time and the resulting bonding properties [...] reliable, and resulted in a very efficient production system. Adhesives Hot melt adhesives are the right choice for production at Herrljunga. The surface of [...] with superior surface quality. The product range of hot melt adhesives is very wide, with adhesives that are all composed of different raw materials and based

Green Adhesives Jowat supplies a comprehensive portfolio of green adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer [...] does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding application? And how does the adhesive influence [...] holistic approach with its Green Adhesives , aimed at developing 360° sustainable adhesives that do not require any compromise of bonding quality nor of process reliability

Increasing sustainability in adhesive bonding can only succeed by looking at different dimensions. The optimization of the adhesives themselves is particularly [...] basis of the adhesive's formulation? What impact does the adhesive used have on consumers? What effects does its use have on the users in the bonding process? And [...] employees. By changing the adhesive they use, for example by switching to monomer-reduced PUR hot melt adhesives or to solvent-based adhesives with a high solids content

hazard-free—PUR hot melt adhesives have long been an integral part of Jowat’s Green Adhesives portfolio of highly sustainable bonding solutions for an extremely [...] key ingredient in reactive PUR hot melt adhesives. While some of the isocyanate is bound into polymers, the adhesive also contains a certain amount of monomeric [...] regulation, adhesives are not subject to the hazard labeling requirement if the monomeric MDI concentration is less than 0.1 percent. Sustainable adhesive solutions

melt adhesive for pleating and frame assembly attracted wide interest among visitors. New high-performance adhesive for pleating and filter frame bonding Pleated [...] a wide range of different processes in which tailor-made adhesives play a major role. The adhesives are adapted to the requirements in production such as fast [...] the high-performance filter. Jowat, the adhesives manufacturer from Detmold, presented at Filtech 2016 their adhesive portfolio for the manufacture of filter