Suche

eaktant® series. Convincing Benefits Standard use of aqueous dispersions requires a time-consuming interim storage period of up to 24 hours during the mattress [...] minimises storage periods and thereby increases cycle rates, it also only requires a significantly lower amount to achieve exceptional adhesive results in comparison [...] facilitate faster processes, however, they have to be dried out in a phase that requires a great deal of energy. This is where the reactive PUR hot melts are clearly

packaging. The primary packaging requires a strong adhesion and good cohesion at low counter pressure, while secondary packaging requires an adhesive with increased

must be protected by an adequate surface coating. Moisture-resistant bonds require special reactive one- and two-component D4 dispersions. That latest generation [...] polymer isocyanate) adhesives have been tried and tested in applications that require durability class D4, in particular joints that are exposed to direct weathering

solvents, are free of emissions and completely odourless when fully cured, and require considerably lower application amounts due to a solids content of 100 %. Depending

increasing requirements New, more rigid foils used in PVC window profile wrapping require adhesives with very special properties. The newly launched adhesive is ch

little pressure. Durable packaging that is resistant to mechanical stress requires adhesives which can provide an excellent compound strength. The professional

because of their characteristics. They are completely free of formaldehyde and require significantly lower application amounts due to a solids content of 100 %.

at high temperatures. The heating of the adhesive in the process therefore requires a high energy input. In comparison, low-temp hot melt adhesives can be processed

manufactured in a wide variety of material combinations and qualities, which require very versatile manufacturing processes. Since these products are assembled

The exposure to high temperatures is a major challenge in this process and requires laminating adhesives with high initial strengths. PU dispersions and PUR hot