Suche

vårt sökande efter "block" gav 14 resultat.

  1. Jowat-Toptherm® 238.20

    The product is block-free and is used for precoating decors as reel material. Product Features Storage-stable precoating of decors, block-free Tested for the [...] interiors. One of the greatest benefits provided by thermoplastic hot melts is the block-free, storage stable precoating of reel material. Therefore, the manufacturing
    /sv-SE/adhesives/hot-melt-adhesives/jowat-toptherm-23820/

  2. Smältlim

    ghet, låg resistens mot lösningsmedel och mjukmedel Förpackning: granulat, block, fat Jowat-Toptherm ® PO-smältlim Bas: polyolefiner (uppbyggt av olika monomerer [...] låg resistens mot lösningsmedel och mjukmedel. Förpackning: granulat, kudde, block, trumma Tillämpningar Kantlistning Lära mer Ommantling av profiler Lära mer
    /sv-SE/lim/smaeltlim/

  3. Softcover manufacturing

    application. 1. Spine glue PUR / hot melts / dispersions / Two-Shot After the book block has been milled on the back, the following step is to apply an adhesive film [...] is applied by nozzle or roller on the first and on the last page of the book block, to bond it to the cover. The adhesive for this application has to be flexible
    /sv-SE/applications/graphics-industry/bookbinding/softcover-manufacturing/

  4. Jowat-Toptherm® 238.80

    interiors. One reason for the growing demand for this type of adhesive is the block-free, storage-stable precoating of reel material. Therefore, the manufacturing
    /sv-SE/adhesives/hot-melt-adhesives/jowat-toptherm-23880/

  5. Jowacoll® 745.60

    lacquered folding boxes, PVC films to carton, as well as casing-in of book blocks in continuous machines. Downloads Application Our product in use Graphics Industry
    /sv-SE/adhesives/dispersion-adhesives/jowacoll-74560/

  6. Jowacoll® 104.20

    a general-purpose PVAc glue for Wood bonding, also for hardwood species and block bonding. Meets the requirements for durability class D2 according to EN 204
    /sv-SE/adhesives/dispersion-adhesives/jowacoll-10420/

  7. Kapsyltillämpningar

    kuddform som ger tillverkaren flera fördelar: Enkel och ren samt, jämfört med block, snabbare bearbetning och betydligt mindre förpackningsavfall. Jowatherm ®
    /sv-SE/tillaempningar/livsmedels-och-konsumentvaruindustrin/dryckesfoerpackningar/kapsyltillaempningar/

  8. Cleaning of Slot Nozzles and Applicator Heads

    inhibitor. Low viscosity. de en fr Jowat ® 930.74 Flushing Agent red, granulate / blocks 20000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains [...] adhesive remnants. de en fr Jowat ® 930.94 Flushing Agent red, glanulate / blocks 50000 / 140 130 - 150 0,95 / 23 80 Flushing agent for high-viscosity PUR hot
    /sv-SE/adhesives/cleaning-and-flushing-agents/cleaning-of-slot-nozzles/

  9. Jowat-Toptherm® 233.10

    precast concrete. Directions for Use The PO adhesives are usually supplied in block, granulate or pillow form and are heated in standard melting units to a temperature
    /sv-SE/adhesives/hot-melt-adhesives/jowat-toptherm-23310/

  10. Jowatherm-Reaktant® 613.18

    drying or pre-drying periods must be observed. The adhesive is immediately block-free after application and ready to use for subsequent processing steps. A
    /sv-SE/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-61318/

Sortera efter

Ta bort alla filter