Suche

load-bearing timber structures Adhesive Type: EN 15425–I–70–GP–0.3–w de en fr The products listed only represent a limited selection of the available product [...] Manufacturing bonded load-bearing timber structures (Fingerjointing) Adhesive Type: EN 15425–I–70–FJ–0.1–w de en fr Jowapur ® 686.30 1-Component PUR Prepolymer [...] 10500 / 20 15 / 20 Manufacturing bonded load-bearing timber structures Adhesive Type: EN 15425–I–70–GP–0.3–w de en fr Jowapur ® 686.60 1-Component PUR Prepolymer

681.xx Adhesive Type: EN 15425–I–70–GP–0.3–w from 10 to 60 minutes, depending on adhesive type from 10 to 60 minutes, depending on adhesive type from 10 to 60 [...] processes. Due to a very good ratio between assembly times and pressing times, Jowapur ® 681.xx opens up completely new possibilities and facilitates a capacity increase [...] 60 minutes, depending on adhesive type de en fr The products listed only represent a limited selection of the available product portfolio. Product availability

foundation of a good night’s sleep and rest. Adhesives are a key component in a very wide range applications in the manufacture of all types of mattresses. [...] comfort and health, and therefore directly contributes to a good night’s sleep. Jowat-Toptherm ® 231.60 is a modern PO hot melt adhesive used in the assembly of pocket [...] adhesive impresses in this application with a log-term durability which has been verified many times in roller tests. Due to a careful selection of raw materials, the

requirements. The long open time of the adhesive allows a lot of flexibility in processing. Coupled with a high green strength, it facilitates the reliable bonding [...] of the most widely used adhesive application. Products have been laminated for a variety of reasons. While laminations largely fulfilled decorative requirements [...] For instance, surfaces and materials may be protected by laminating them with a high-resistance layer (e.g. kitchen worktops laminated with pressure laminates

are used to a steadily increasing degree in assembly bondings and flat lamination for car interiors. One reason for the growing demand for this type of adhesive [...] Jowat succeeded in developing a thermoplastic PO hot melt adhesive that is characterised by an extremely high heat resistance and a very wide range of adhesion [...] adhesion to materials like PP and NFPP. In a comparison test, Jowat-Toptherm ® 238.80 reached heat resistance values that are by approx. 20 – 30 °C higher than those

standards in quality and appearance. Print finishers have a wide variety of possibilities for upgrading a product. One established and effective procedure is the [...] machine type and the application method used, as well as on the specific requirements. However, the adhesive choice can also be influenced by what type of paper [...] structured, or special effects films. This results in enhanced printed surfaces of a superior quality. The quality of the lamination depends on several factors. The

“wood glues” – impress with a wide range of benefits. They are physiologically harmless, form a colourless bondline, and have a relatively low viscosity. In [...] and processing equipment and has played a major role in the wide use of this type of adhesives. PVAc glues are used in a broad spectrum of applications. From frame [...] veneering – PVAc glues provide a reliable bond on many different wood species and wood-based substrates. Jowacoll ® 104.20 is a general-purpose glue in the Jowat

excellent results in roll tests with up to 45,000 cycles. A relatively low viscosity facilitates a good Penetration into the PP nonwoven. In spite of the low [...] adhesive can be processed on all standard unit types and applied vertically as well as horizontally, providing a stable adhesive bead which does not move during [...] excellent performance in fast assembly processes, bridging the tensions and ensuring a permanent bonding of the rows of pocket innerspring. Jowatherm ® 261.65 has been

shapes with a highly attractive design. Carrier bags can be manufactured at low costs with Jowat-Toptherm ® hot melt adhesives, which provide a reliable bond [...] materials such as polypropylene woven without a prior surface treatment. These hot melts are characterised by a good wetting property, strong adhesive force [...] the manufacture of packaging units that have to withstand heavy loads. This type of material is required for instance to produce sacks and bags for the packaging

kyla, eller med avseende på deras brandegenskaper. Produktinformation ☟ Choose a product group 1-component 2-component hot melt adhesive 1-component Base Viscosity [...] wood species, for polystyrene foam, PUR foams, metals and many other substrates. A.1/3.18 e de en fr Jowapur ® 685.12 1-Component PUR Prepolymer 6000 / 20 > 10 [...] species, for PUR foam materials and polystyrene foam, and many other substrates. A.1/3.18 e de en fr Jowapur ® 685.32 1-Component PUR Prepolymer pasty / 20 > 10