Suche

vårt sökande efter "based" gav 237 resultat.

  1. Surface finishing with transparent functional layers

    spectrum of adhesion, hot melt adhesives based on PUR are ideal for bonding a wide range of foils, for instance foils based on PET, PVC or PU, with different gloss [...] surfaces, glossy looks in particular, are in high demand. The lamination of wood-based materials with decor foils and visually expressive designs produced in multistep [...] laminated with transparent foils from reels. Due to the wide variety of wood-based materials used in the production of furniture fronts and design floors, the
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/surface-finishing-with-transparent-functional-layers/

  2. Will Not Get You Into Hot Water - Jowat-Toptherm® 221.00 | A Good Choice Since 1989

    For many years, the popularity of hot melt adhesives based on polyolefin (PO) has increasingly grown. Since the introduction of these thermoplastic hot melt
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/will-not-get-you-into-hot-water-jowat-topthermr-22100-a-good-choice-since-1989/

  3. You Can Bank on It - Jowacoll® 103.10 | A Good Choice Since 1997

    for bonding hard- and softwood as well as for the flat laminating of wood-based materials. The PVAc dispersion meets durability class D3 in accordance with
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/you-can-bank-on-it-jowacollr-10310-a-good-choice-since-1997/

  4. New regulation PU adhesives

    prepared a REACH restriction dossier for industrial and professional applications.Based on this, a new regulation on diisocyanates is being finalised by the European
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/new-regulation-pu-adhesives/

  5. Make a Clear Cut - Jowat® 900.00 | A Good Choice Since 1994

    processing. Jowat ® 900.00 is used primarily as a release agent for adhesives based on PVAc dispersion, UF, MUF and PRF.
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/make-a-clear-cut-jowatr-90000-a-good-choice-since-1994/

  6. Jowatherm® 280.30 is a true classic.

    impressive bonding strength and high yield. An unfilled edgebanding adhesive based on a classic EVA (ethylene vinyl acetate) formulation, Jowatherm® 280.30 f
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/still-plenty-of-power-jowathermr-28030/

  7. Come Hell or High Water - Jowatherm-Reaktant® 607.40 | A Good Choice Since 2002

    For decades, bonding edgebands to wood-based boards has been an established practice in the manufacture of furniture. Progress in engineering and processing
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/come-hell-or-high-water-jowatherm-reaktantr-60740-a-good-choice-since-2002/

  8. Small Beings, Big Plans

    try? The majority of the adhesives available on today’s market are (still) based on fossil resources such as petroleum. However, Jowat has been working tirelessly [...] already launched two series of adhesives that are made partially from organic-based raw materials—in a percentage that still keeps on growing. The most important [...] explains. “Polylactides are more brittle than other plastics, and an adhesive based on this substance would not be as resistant to heat as hot melt adhesives made
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/small-beings-big-plans/

  9. Primer Jowat® 408.48

    Product Description Jowat has developed a new solvent-based primer for highest demands in edgeband manufacturing and processing, especially with regard to [...] Primer Further Products Följande produkter inom „Jowat ® Primer (Solvent-based)”
    /sv-SE/adhesives/primer/jowat-primer-40848/

  10. Jowat-Toptherm® 236.50

    industrial manufacture of furniture and interior furnishings. Hot melt adhesives based on ethylene-vinyl-acetate (EVA) have already been used in this application [...] halogen spotlights were introduced in the 1980s. Today, hot melt adhesives based on polyolefin (PO) are the established state of the art and the products of
    /sv-SE/adhesives/hot-melt-adhesives/jowat-toptherm-23650/

Sortera efter