Isocyanate (usually 4-4’- Methylene diphenyl diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with an MDI (CAS No. 101-68-8)
(usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate
remain molten? What application amount is needed and how high is the feed speed? 2. Side glue Hot melts / dispersions / PUR In general, the adhesive is applied
isocyanate (usually 4-4’- Methylene diphenyl diisocyanate – in short MDI) of approx. 2 %. Since 2002, products containing isocyanate with an MDI (CAS No. 101-68-8)
(usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate
(usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate