Suche

ße 10 – 14, 32758 Detmold, Germany, can be contacted by phone at: +49 (0) 5231 749-0, e-mail: info @ jowat . de . B. Data Protection Officer: Jannik Wallbaum [...] legal duties of the data controller arising from section 6(2) of DGUV provision 1, section 8(2) of the German Act on Occupational Health and Safety (Arbeitssc [...] . The legitimate interest in this processing operation arises from Article 6(1) point (c) fo the GDPR in conjunction with the aforementioned legal provisions

de också utlösa allergier. Därför måste limmer med en andel monomerisk MDI> 0,1 % märkas med GHS-symbolen 08 (hälsorisk) enligt de nuvarande reglerna för märkning [...] märkning av farliga ämnen (GHS). Andelen monomeriskt MDI i MR-lim är under 0,1%. Enligt den nuvarande EU-förordningen (EU1272 /2008 och den tillhörande ändr [...] initial strength. Low flame-spread characteristics according to IMO Resolution A.1/3.18 e. de en fr Jowatherm-Reaktant ® MR 608.90 Monomer-Reduced PUR Hot Melt

2012, products containing isocyanate with a free monomer isocyanate content of 0.1 % or higher must be labelled with the GHS pictogram no. 8 (health hazard) and [...] information (H and P statements). Adhesives with an MDI content of less than 0.1 % are not subject to hazard labelling requirements. Jowat has successfully been

stress. Due to its special formulation, Jowacoll ® 103.30 meets IMO Resolution A.1/3.18 e “low flamespread characteristics” and can be used for the finishing of [...] a D3 adhesive in accordance with EN 204/205 and meets a tensile strength > 7.0 N/mm² according to EN 14257 (WATT ‘91). Jowacoll ® 103.30 is characterised by

ant ® GROW 631.20 Biobased Hot Melt Adhesive 6000 ± 2000 / 140 110 - 140 1,15 ± 0,05 / 20 58 ± 5 3 de en fr Product Features Jowatherm-Reaktant ® GROW – Su

approx. 2 %. Since 2012, products with a free monomeric isocyanate content of 0.1 % and more must be labelled with the GHS pictogram No. 8 (health hazard) and [...] statements). Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling requirements. Downloads Application Our

finishing applications, with particle diameters between approx. 200 and 800 nm (1 nm = 0.001 μm) that deliver a very clear and transparent adhesive film. The technical [...] Depending on the type of dispersion, the size of the plastic particles can vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. [...] in downline processing, the recommended amount of crosslinker to be added is 1.5 – 5 %. This applies especially if downline processing involves one of the

(PDF) Jowat ® 930.60 Cleaning Agent colourless, fluid approx. 180, max. 190 1,1 Cleaning heavily soiled metal parts (nozzles, rollers, filters, etc.). Detaches [...] 190 160 0,9 / 20 110 Flushing agent for POR hot melt application units de en fr Jowat ® 931.00 Flushing Agent colourless translucent 52500 / 190 190 0,9 / 23 [...] adhesive. de en fr Jowat ® 930.34 Flushing Agent red, granulate 9000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor

(PDF) Jowat ® 930.60 Cleaning Agent colourless, fluid approx. 180, max. 190 1,1 Cleaning heavily soiled metal parts (nozzles, rollers, filters, etc.). Detaches [...] 190 160 0,9 / 20 110 Flushing agent for POR hot melt application units de en fr Jowat ® 931.00 Flushing Agent colourless translucent 52500 / 190 190 0,9 / 23 [...] adhesive. de en fr Jowat ® 930.34 Flushing Agent red, granulate 9000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor

(PDF) Jowat ® 930.60 Cleaning Agent colourless, fluid approx. 180, max. 190 1,1 Cleaning heavily soiled metal parts (nozzles, rollers, filters, etc.). Detaches [...] it will shrink, thus increasing the cleaning effect. Melting Tank (Glue Pot) 1. At processing temperature, drain as much as possible of the PUR hot melt adhesive [...] fr Jowat ® 930.74 Flushing Agent red, granulate / blocks 20000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor