Suche

vårt sökande efter "polyolefiner" gav 17 resultat.

  1. Jowat AG at the Hannover Messe 2014. - Practical Demonstration: Jowat casting compound in low-pressure injection moulding

    compounds, Jowat supplies a wide range of industrial adhesives. A special polyolefin-based assembly hot melt for cores bonding is also introduced. The exceptionally
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-ag-at-the-hannover-messe-2014-practical-demonstration-jowat-casting-compound-in-low-pressu/

  2. New formula: Thermoplastic adhesives for high-quality lamination of wood-based substrates – for general use with all common laminating machines using in- or offline application.

    conventional thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive bondlines with a degree of hardness tailored for
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/new-formula-thermoplastic-adhesives-for-high-quality-lamination-of-wood-based-substrates-for-gene/

  3. Techtextil 2013: Strong adhesives for lamination of NFPP and PP in car interiors - Reliable bonding for highly difficult surfaces by using reactive hot melt adhesives

    materials may be textiles or TPO foils - with or without foam backing. This polyolefin (PO) hot melt adhesive offers superior adhesion properties to low-energy [...] laminating processes for car interiors with reactive hot melt adhesives based on polyolefin (POR), the production efficiency can be substantially increased. This adhesive [...] designs. Both the Jowat-Toptherm® adhesives and Jowatherm-Reaktant® based on polyolefin are already in serial production at well-known car companies.
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/techtextil-2013-strong-adhesives-for-lamination-of-nfpp-and-pp-in-car-interiors-reliable-bonding/

  4. Techtextil 2013: New thermoplastic and reactive adhesives for more process reliability in the manufacture of technical textiles.

    Whether based on polyolefin (PO) or polyurethane (PUR), whether thermoplastic or reactive: The new hot melt adhesives from Jowat AG have been developed especially [...] cost-efficient manufacture of textiles used in the construction industry. Polyolefin-based adhesives are the innovative hot melt adhesives with a wide adhesive
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/techtextil-2013-new-thermoplastic-and-reactive-adhesives-for-more-process-reliability-in-the-manufa/

  5. Jowat AG presents an innovative adhesive portfolio at the Techtextil 2013 - Efficiency is the key target of development: adhesives for textile compounds and applications in vehicle interiors.

    thermoplastic polyolefin (TPO) foils. This permits bonding without a pretreatment of the NFPP surface and also of the TPO foil. The thermoplastic polyolefin (PO) hot [...] allows bonding without pretreatment of the substrate surfaces. A reactive polyolefin (POR) hot melt adhesive from the product family of Jowatherm-Reaktant® is
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-ag-presents-an-innovative-adhesive-portfolio-at-the-techtextil-2013-efficiency-is-the-key-ta/

  6. Jowat-Toptherm® for carton closing Superior tack even with little or no back-pressure

    The polyolefin-based hot melt adhesives of the Jowat-Toptherm® family permit reliable packaging processes even when feed speeds are high. Cartons made of corrugated [...] surface qualities, to ensure strong and durable bonds. The new generation of polyolefin-based Jowat-Toptherm® adhesives also shows superior performance results when
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-topthermr-for-carton-closing-superior-tack-even-with-little-or-no-back-pressure/

  7. Jowat-Toptherm® for bonding carrier bags made of woven polypropylene

    New engineering technologies have been developed for processing thin and highly load-resistant PP wovens, and bonding of the polypropylene carrier bags is an attractive and cost saving alternative whe
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/jowat-topthermr-for-bonding-carrier-bags-made-of-woven-polypropylene/

  8. Faster than fast: New bonding professionals for cartons and folding boxes

    Jowat-Toptherm® 256.91 and Jowat-Toptherm® 256.92 are adhesives especially conceived for the manufacture of cartons and folding boxes. Their performance parameters were to a large extent optimized to
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/faster-than-fast-new-bonding-professionals-for-cartons-and-folding-boxes/

  9. Drinktec 2013: Labelling and carton bonding are in focus of Jowat AG at the trade show - Polyolefin-based adhesive formulations for more efficiency in the manufacturing process

    performance parameter. The products of the Jowat-Toptherm® family are based on polyolefin, specialized polymers with tailored characteristics meet these requirements [...] recommendations XXV and XXXVI of the BFR. Jowat-Toptherm® for carton closing The polyolefin (PO) based hot melt adhesives of the Jowat-Toptherm® product range show superior
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/drinktec-2013-labelling-and-carton-bonding-are-in-focus-of-jowat-ag-at-the-trade-show-polyolefin/

  10. ZOW 2014: Leading adhesive technology for edgebanding

    laser methods, or cannot be purchased in lots that are economical. The new polyolefin-based precoating adhesive from the Jowat-Toptherm® series is available to
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/zow-2014-leading-adhesive-technology-for-edgebanding/

Sortera efter

Ta bort alla filter