Suche

vårt sökande efter "cycle" gav 11 resultat.

  1. Car seats

    sitting. Therefore, the seats are exposed to a lot of stress during the life cycle of a car. Apart from durability and sturdiness, requirements for appearance
    /sv-SE/applications/automotive-and-transportation/vehicle-interiors/car-seats/

  2. Assembly of Core Packages

    Application Description The new generation of PO hot melts for the assembly of core packages Core assembly adhesives have to meet very complex requirements. They need to provide a long open time, a fa
    /sv-SE/applications/automotive-and-transportation/foundries/assembly-of-core-packages/

  3. Vehicle interior lamination

    processes with regard to all lamination methods, including VACFLOW – short process cycles, low energy consumption, and clean processing – as well as the specific re
    /sv-SE/applications/automotive-and-transportation/vehicle-interiors/vehicle-interior-lamination/

  4. Technical textiles in cars

    hot melts meet highest demands: These adhesives are characterised by short cycle times, high compound strength while also providing a wide range of adhesion
    /sv-SE/applications/textile-industry/mobiltech/technical-textiles-in-cars/

  5. Jowat-Toptherm® 238.97

    of automation introduced in many foundries, and facilitates short process cycles in the bonding of core packages. Application Description Jowat-Toptherm ® 238
    /sv-SE/adhesives/hot-melt-adhesives/jowat-toptherm-23897/

  6. Jowatherm® 261.65

    mattress. The product provides excellent results in roll tests with up to 45,000 cycles. A relatively low viscosity facilitates a good Penetration into the PP nonwoven
    /sv-SE/adhesives/hot-melt-adhesives/jowatherm-26165/

  7. Battery bonding

    optimally adapted to fully automated production processes with fast process cycles due to a long open time and a fast build-up of cohesion. Another benefit is
    /sv-SE/tillaempningar/fordon-och-transport/battery-bonding/

  8. Jowacoll® 103.30

    roller applicators, and it impresses with short drying times and fast process cycles. Jowacoll ® 103.30 stands out from other Jowacoll dispersions due to its fast
    /sv-SE/adhesives/dispersion-adhesives/jowacollr/jowacollr-10330/

  9. Jowat® 900.00

    Application: For cold and hot pressing For single- and multi-daylight presses, fast-cycle presses, mold presses, and veneering presses For machine parts (e.g. pressure
    /sv-SE/adhesives/cleaning-and-flushing-agents/jowatr-90000/

  10. Jowatherm® 250.00

    processes. The manufacturing process is characterized by special conditions: fast cycle times, low application amounts coupled with the requirement for high initial
    /sv-SE/adhesives/hot-melt-adhesives/jowatherm-eva-hot-melt-adhesive/jowathermr-25000/

Sortera efter

Ta bort alla filter