Suche

vårt sökande efter "bond" gav 116 resultat.

  1. Jowatherm-Reaktant® 605.62/65

    established for many years. They are used in applications where exceptionally high bond quality is required, in particular if the end product must fulfil superior
    /sv-SE/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-60562/

  2. Jowat® 695.15

    promoter, they attain best adhesion to many substrates that are difficult to bond or impermeable. The favourable qualities can be used for bonding as well as
    /sv-SE/adhesives/reactive-systems/jowat-ms-polymere/jowat-ms-polymer-69515/

  3. Primer Jowat® 408.40

    edgebands: Improved, homogeneous application pattern as a basis for good permanent bond strengths. Free of chlorine – the primer therefore also complies with IKEA-
    /sv-SE/adhesives/primer/primer-jowat-40840/

  4. Jowatherm-Reaktant® MR 604.90

    with Primer Jowat ® 406.78 (MEK-based). Those two product combinations can bond more than 95 % of the PVC- and PMMA-based (with primer coating) decor foils
    /sv-SE/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-mr-60490/

  5. Surfaces with a big impact - Lacquer glues in the last 25 years

    industry as well as meet the legal requirements. And facilitate a reliable bond.” The article is published in the magazine "exakt 10.2019" in German language
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/surfaces-with-a-big-impact-lacquer-glues-in-the-last-25-years/

  6. 100 years of Jowat

    their high level of efficiency and cleanliness, and which facilitate recyclable bonds according to the German packaging law (Verpackungsgesetz). The adhesive ma
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/100-years-of-jowat/

  7. New pleating adhesive for filter manufacturing

    October in hall 11.1, booth B12 under the anniversary banner “Our word is our bond. Since 1919”.
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/new-pleating-adhesive-for-filter-manufacturing/

  8. Zero joint, Top performance

    the bonding partners facilitates a significantly increased resistance of the bond against heat (over 120 °C) as well as water and steam. Handling the then new [...] physical build-up of strength which results in the initial strength of the bond. This is followed by a chemical crosslinking in which the adhesive reacts with [...] on the substrate surface, thus improving adhesion and making it possible to bond even difficult materials, for instance aluminium edgebands. PUR hot melt adhesives
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/zero-joint-top-performance/

  9. Carrying a lot of weight - Multifaceted adhesives for load-bearing glulam

    effort. The Jowapur® prepolymers are reinforced with fibres that increase the bond strength and prevent the assemblies from sliding apart in the manufacturing
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/carrying-a-lot-of-weight-multifaceted-adhesives-for-load-bearing-glulam/

  10. Sticking PUR - mattress bonding with Jowatherm-Reaktant® 639.20

    in terms of comfort; quite the opposite, in fact, since the soft adhesive bonds and minimal tacky adhesive surface residue left behind by PUR prevent any
    https://www.jowat.com/sv-SE/nyhetsrumdetalj/sticking-pur-mattress-bonding-with-jowatherm-reaktantr-63920/

Sortera efter