Suche

ABS and PP edgebands. Application by gravure or smooth roller. Product Features ✓ Advantages Primer Jowat ® 408.48 provides special benefits for ABS and PP edgebands: [...] (THF) and N-Ethylpyrrolidone (NEP), and has been developed particularly for PP and ABS edgebands. Following many decades of experience with edgeband primers [...] processed properly, bites the ABS but does not dissolve. Very good adhesion on PP with Corona pretreatment and 3 % Jowat Crosslinker 498.00. Chlorine-free – therefore

open time, high initial strength and good adhesion to materials based on PP (e.g. NF-PP). The product is block-free and is used for precoating decors as reel material [...] The continuously growing diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension

made from post-consumer recycled polypropylene (rPP-PCR), with an rPP content of 30%. This high proportion of rPP has been achieved without increasing the weight

Jowat ® 408.48 PU 53,5 ± 2,5 / 20 13 ± 1,5 / 90 PP, PET, ABS de en Jowat ® 408.40 PU 35 ± 5 / 20 15 ± 2 / 90 ABS, PP de en water based primer Base Viscosity [mPas] [...] 409.12 PU 650 / 20 33.5 PVC, ABS, PP, PMMA, PET, Alu / Stainless steel de en fr Jowat ® 409.45 PU 200 / 20 28 PVC, ABS, PP, PMMA, PET de en The products listed [...] omfattande informationen om de många olika material som bearbetas (t.ex. PVC, ABS, PP, PET, PMMA, aluminium och rostfritt stål) är appliceringstekniken som används

/ 200 180 - 200 For flat lamination, for instance of substrates based on PP (NF-PP) in the automotive industry, also edgefolding operations. Also for precoating [...] melt adhesives: Good adhesion to nonpolar substrates, e.g. polypropylene, NF-PP External precoating possible Easy and user-friendly processing Good adhesion [...] fogging values 1 Upper Door Trims Materials (examples): Carrier substrate: ABS, PP, PC/ABS Decor material: genuine leather, PVC foil, TPO foam foils Adhesive systems

The continuously growing diversity of new matrix material combinations like NF-PP is highly challenging in bonding, especially on surfaces with low surface tension [...] extremely high heat resistance and a very wide range of adhesion to materials like PP and NFPP. In a comparison test, Jowat-Toptherm ® 238.80 reached heat resistance

Jowat AG enables the cost efficient inline manufacture of carrier bags made of PP wovens: The new powerful adhesive from the Jowat-Toptherm® product family de [...] demonstrates superior wetting characteristics, which allows the bonding of PP woven materials without any extensive surface pre-treatment. A clear advantage -

technologies have been developed for processing thin and highly load-resistant PP wovens, and bonding of the polypropylene carrier bags is an attractive and cost [...] conventional method of producing these bags by sewing. Up to now, bonding the PP wovens required surface pretreatments. With the innovative Jowat-Toptherm® adhesive

hållfasthet kan förbättras med hjälp av ett härdningsmedel. Vissa material (t.ex. PP) kräver att primern blandas med en härdningsprodukt. Funktioner Primer erbjuder [...] lösningsmedelbaserade primers för en mängd olika substrat, däribland PVC, ABS, PP och PET. Förpackning : flytande; hink, ståltunna, stålfat, IBC Jowat ® Wash Primer

t of the polypropylene (PP) - surfaces before bonding. One of the materials commonly used in vehicle interiors is polypropylene (PP). Components of this material [...] the new POR hot melt adhesive now allows to bond without pretreatment of the PP components with low surface tension, while still achieving complete surface wetting